- ➤【The F299201 Vent Free Blower Fan Kit Specifications】: Size: 5 3/8'' x 5 3/16'' x 6 1/8'', Spacing of Screw Holes: 4 7/8'' x 5 1/2'', Power Cord Length: 54", Wattage: (W)18, Volts: 120V, Amperage: 0.02. Easy to install and delivers 18.5 CFM with a standard 3-prong 120-Volt plug. Can be used on wall heaters that are wall mounted or floor mounted. Please Note: Please be sure to compare the dimensions listed with your original, to ensure proper fitment.
- ➤ 【Compatibility】: F299201 Blower Fan Kit for Mr. Heater 20,000 BTU - 30,000 BTU Vent-Free Well Heater(2016 to Present). Fits NTE Item#s 52563, 52564, 52569, 52570, 52558, 52559, 52561, 52562, 255839 and 255639. The Mr. Heater Vent-Free Blower Kit can be installed on 20,000 and 30,000 BTU model Blue Flame and Radiant, Propane and Natural Gas Vent-Free heaters(2016 to current).
- ➤【AUTO/OFF/Manual Operation Mode】 Installed switch installed on the heater blower is a three-position switch. Set the switch to 'MAN' for manual mode, allowing the fan to continuously run until the switch is returned to the OFF 'O' position'; Set the switch to 'AUTO' for the automatic mode, which will automatically cycle the blower on as the heater heats up and then off when the unit has cooled.
- ➤【Improve Whole Room Heating】: The F299201 heater blower fan provides whisper-quiet operation, moving more air from the ventless heater, blowing heat toward the open space of the living room instead of rising upward, circulating heat through the room and helping to heat the room faster.
- ➤【Easy to Install】: The F299201 heater fan is complete assembly, includes power cord, built in thermostat, mounting screws. Only a screwdriver needed, expert installation not required. If you have any other questions, please feel free to contact us.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
