How do you Replace the Auger Motor on a Pellet Grill?

Pellet grills are a popular choice for outdoor grilling due to their versatility and ease of use. However, like any mechanical device, parts can wear out over time and may require replacement. One of the most common issues with pellet grills is a faulty auger motor. In this blog, we will provide a brief introduction on how to replace the auger motor on your pellet grill.

Here are the main points you need to follow:

1. Gather some tools you'll need and a new augor motor. If you have not got a new one, you can check ours, this unit can work with many of the common pellet grills, such as Traeger, Pit Boss, Camp Chef…

2. Turn off and unplug your pellet grill for safety.

3. Remove the hopper from the grill to access the auger motor. The hopper is usually held in place by screws.

4. Disconnect the wires from the old motor and use pliers or a wrench to remove any bolts or screws holding it in place.

5. Install the new auger motor by reversing the removal process. Tighten the bolts or screws and connect the wires.

6. Test the new motor by plugging in the grill and turning it on.

By following these steps, you can replace the auger motor on your pellet grill and enjoy delicious, smoky meals for years to come. If you need replacement parts, you can send your pics with model labels to Support@grillpartsreplacement.com . We will help you find the exact parts without making the wrong purchase.

PS: Click here to check all the parts for Pellet Grills.